Superior Floor Coatings logoSuperior Floor Coatings
Who We Help
Contact

Epoxy Cove Base & Wall Coatings
in Arthur, IL

The cove base sweeps the floor coating up the wall so there's no seam where floor meets wall — a continuous, sealed surface for kitchens, wash bays, animal areas, and anywhere washdown matters.

Epoxy Cove Base & Wall Coatings

Every floor has a weak spot: the corner where the floor meets the wall. That joint is where dirt collects, where water pools, where bacteria take hold, and where a hose-down pushes everything you just cleaned off the floor right back into a seam the mop cannot reach. An epoxy cove base takes that joint out of the equation. It is a curved transition that sweeps the floor coating up the wall in one continuous, sealed surface — no corner, no joint, no hiding place.

A cove base is a resin build shaped into a radius at the base of the wall, tied into the floor coating and carried up the wall a few inches to a foot or more. The floor and the wall become one sealed surface. Water runs down the wall and onto the floor and out the drain, with no seam to catch it. Dirt wipes off the wall the same way it wipes off the floor. In a commercial kitchen, a processing room, a wash bay, a kennel, a locker room, or any space that gets hosed down, that continuous surface is what makes the room genuinely cleanable instead of just mostly cleanable.

Resin wall coatings extend the same idea up the wall. Where a wall takes splash, spray, grease, or washdown, a resin coating gives you a sealed, wipeable surface instead of bare block, drywall, or painted concrete that absorbs whatever hits it. We tie the wall coating into the cove base and the floor coating so the whole assembly — floor, curve, wall — is one continuous system. That is the difference between a room that looks clean and a room that is clean, all the way into the corners.

Request a quote

Tell us about your floor

Signs it's time

Where the Floor Meets the Wall

The corner never gets clean

Dirt and water collect in the joint where floor meets wall and no mop reaches it. A cove base takes the joint out so the whole corner wipes clean.

You hose the room down

Wash bays, processing rooms, and kennels get hosed regularly. A cove base lets the water run out the drain instead of pooling in the corner seam.

Sanitation is inspected

Kitchens, food prep, and animal areas live and die on cleanability. A seamless floor-to-wall surface has no joint for bacteria to hide in.

Walls are absorbing splash

Bare block or painted drywall soaks up grease, water, and chemicals. A resin wall coating seals the wall so it wipes clean instead of staining.

The wall base is failing

Vinyl or rubber wall base peels, traps water behind it, and rots the wall. A resin cove base is part of the floor system — it does not peel.

You're building or renovating a washdown space

Plan the cove base in from the start. It is far easier to build a seamless floor-to-wall system during construction than to add it later.

How the job goes

How a Cove Base Goes In

1

Look at the room and the washdown routine

We walk the space, see what hits the walls, how the room gets cleaned, and how high the splash and spray go. Then we plan the cove height and the wall coating to match.

2

Prep the floor and the wall base

We prep the concrete floor and the wall substrate at the base — grinding, cleaning, repairing — so the resin bonds to sound, open surfaces on both.

3

Shape the cove

We build the resin cove base into a radius at the base of the wall, tying it into the floor coating so the floor curves up into the wall in one continuous surface.

4

Floor coating

The floor coating goes down and ties into the cove — base coat, flake or finish — so the floor and the curve are one sealed system.

5

Wall coating and topcoat

Where the wall needs it, we carry the resin coating up the wall and seal the whole assembly — floor, cove, wall — under a durable topcoat.

6

Back in use

After the cure window the room is ready for washdown and daily use — one continuous, sealed, cleanable surface from the floor up the wall.

Options

Cove and Wall Options to Plan

Cove height

A standard cove base runs a few inches up the wall; a taller cove or full wall coating goes higher where splash and spray reach. We size it to the room and the washdown routine.

Flake vs. solid color

The floor can carry a flake system or a solid color, and the cove and wall coating tie into the same finish. We help you pick the look that fits the space.

Slip-resistant texture

In a washdown room the floor gets wet and stays wet. We can build a skid-resistant texture into the floor and the cove so the whole surface holds grip.

Resin wall coating extent

Some rooms need the cove only; others need the resin carried up the wall to chair-rail height or higher. We plan the extent to where the wall actually gets hit.

Why Superior Floor Coatings

Why Cleanable Rooms Start With Our Cove Base

Superior Floor Coatings is based in Arthur, Illinois, and our focus is commercial and industrial floor coatings — shops, warehouses, plants and ag facilities that need a floor built for real traffic. We coat new construction and existing concrete, and we install epoxy resin cove base and wall coatings for spaces that need a seamless, washable surface.

We answer the phone Monday to Saturday, 6 AM to 9 PM. Call us at (217) 294-3979 and we'll walk you through it.

Questions

Epoxy Cove Base & Wall Coatings FAQ

What exactly is an epoxy cove base?+

A cove base is a curved resin build at the base of the wall that ties the floor coating into the wall, so the floor sweeps up into the wall in one continuous surface. It takes the corner joint out of the room so there is no seam for dirt, water, or bacteria to collect in.

Where does a cove base make sense?+

Anywhere washdown or sanitation matters — commercial kitchens, food prep, processing rooms, wash bays, kennels and animal areas, locker rooms, and any space that gets hosed down or needs to be genuinely cleanable to the corner.

Can you coat the wall as well as the floor?+

Yes. We carry a resin wall coating up the wall and tie it into the cove base and the floor, so the floor, the curve, and the wall are one sealed system. We size the wall coating to where the splash and spray actually reach.

Does a cove base replace vinyl wall base?+

A resin cove base is part of the floor system — it does not peel, trap water behind it, or rot the wall the way vinyl or rubber wall base can. It is the seamless alternative for washdown and sanitary spaces.

How high up the wall does the cove go?+

A standard cove runs a few inches; we can build it taller or carry a full wall coating higher where splash and spray reach. We size it to the room and the cleaning routine.

Is a cove base only for commercial work?+

Cove base is most common in commercial and industrial washdown spaces, but it works anywhere a seamless, cleanable corner matters. Call us at (217) 294-3979 and we'll walk you through whether it fits your space.

Service area

Seamless Floors and Walls Across Central Illinois

Based in Arthur, IL, we serve homes, businesses and industrial facilities within about 50 miles. Larger commercial and industrial projects farther out: call to talk it through.

Need a room that's cleanable to the corner?

Tell us about the space and how it gets cleaned. We'll plan a seamless floor-to-wall system that fits the washdown.