Who We Help

Floors for every
kind of building

From commercial and industrial facilities to agricultural buildings, builders and homeowners — we match the floor system to the work the floor has to do.

Who We Help

Floors for every kind of building

Five floor systems, five sample tiles. Each one is matched to the work the floor has to do — from a showroom the public walks on to a shop floor that takes tractors.

Sample 01 — Commercial

Commercial Buildings

Floors for businesses the public walks on — built to stay sharp under daily traffic.

foot trafficscuffs & spillscartscleaning chemicals

We install high-build epoxy systems that seal the concrete, resist scuffs and spills, and wipe clean at the end of the day. Epoxy cove base sweeps the floor up the wall so there is no joint where dirt and water collect — a real advantage in restaurants, clinics and food-prep areas where sanitation matters.

Whether it is a showroom that has to impress, an office that sees heavy foot traffic, or a retail space that takes carts and cleaning chemicals, we match the resin and the build to the work the floor has to do.

Sample 02 — Industrial

Industrial Facilities

Heavy-duty resin coatings engineered for forklifts, equipment and chemical exposure.

forkliftschemical spillshot tireswashdown

We install heavy-duty resin coatings engineered for that load, with the build thickness and the resin hardness matched to the traffic. A warehouse aisle that sees forklifts all day needs a harder, thicker system than a light-traffic office.

A processing floor that gets hosed down every night needs a coating that tolerates moisture and chemical cleaning. We read the floor, talk through the chemicals and the loads, and specify the right system — then schedule the work around your production so only part of the floor is out of service at a time.

Sample 03 — Agricultural

Agricultural Buildings & Shops

Floors that take oil, fuel, fertilizer and heavy equipment rolling in and out.

oil & fuelfertilizertractorshydraulic fluid

A bare concrete floor absorbs all of it, stains deep, and gets harder to clean every season. An epoxy or resin coating seals the concrete so spills wipe up, the surface resists the chemicals ag work throws at it, and the floor holds up to tractors, implements and trucks.

We install systems built for the load — heavier builds for equipment traffic, skid-resistant finishes where foot and tire traffic mix, and resins that tolerate the oils and fuels a working shop runs on every day.

Sample 04 — Builders

Builders & General Contractors

Coat the slab inside the build sequence so it starts life sealed and protected.

new slabconstruction trafficstainingmove-in ready

Once the concrete is poured and cured, we coat it before fixtures, shelving and equipment move in — so the floor starts its life sealed, clean and ready for service on move-in day. That protects the slab from construction traffic, staining and damage during the rest of the build.

We coordinate with your schedule so the coating goes down at the right point in the sequence — after the slab is ready, before the space is filled — and we work around the trades on site.

Sample 05 — Homeowners

Homeowners

Garages, basements and stairs with the same bond and prep as a warehouse floor.

hot tiresroad saltmoisturefoot traffic

A garage floor takes hot tires, oil drips, road salt and snow-melt every winter; a basement floor deals with moisture, humidity and the wear of daily use; stairs and entry steps take foot traffic and weather. We install decorative flake and solid epoxy systems that seal the concrete, resist staining and moisture, and turn a rough, dusty slab into a clean, bright, usable space.

The same prep — grinding, crack repair, moisture testing — goes into a residential floor as a commercial one, because a bond that lasts is what makes any floor worth doing.

Not sure which system fits?

Call us at (217) 294-3979 and we will walk you through it. We will look at the floor, talk through the traffic it carries, and match the right system to the work.